WZ-2301A is an indoor solution 1W bi-directional Booster designed for 2.4GHz
wireless LANs. This unit comes with an easy plug-and-play installation, which
works together with an indoor Wireless Access Point to improve its operation
range and performance.
The unit is ideal for use with 2.4 GHz frequency hopping or direct sequence
spread spectrum radio modems and 802.11b/g devices.
The amplifiers increase range by providing transmit gain as well as low-noise
receive gain. This receive gain increases the receive sensitivity of wireless
LAN Access Point. Full output power of 1W is achieved with only 5 mW input into
the Booster.
Features:
Cast Aluminum Construction
Power and transmit LEDs
15dB transmit gain (adjustable)
Lightning Protection
High Gain, High Value, High Performance
Increase range of low powered radio modems Antenna Specifications:
5dBi Antenna w/SMA Female Connector145% Performance150% Distance
Antenna length: 191mm
Connector: SMA Female
Booster/Amplifier Specifications:
|
Operation Range |
2400-2500 MHz |
|
Operating Mode |
Bi-directional, half-duplex, Auto-Switching via carrier sensing |
|
Transmit Gain |
15dB (Adjustable) |
|
Output Power |
1W/30dBm nominal for
802.11g/54Mbps
|
|
Frequency Response |
*+- 1dB over operation range |
|
Transmit Input Power |
Max. 100mW, Min 6mW |
|
Receiver Gain |
15dB typical |
|
Receive Noise Figure |
3.5dB typical |
|
Connector |
SMA receptacle (50 ohm) |
|
Power |
6V DV Max. current <1A, 90-264V for AC adapter |
|
Operating Temperature |
*-20 to + 70C |
|
Operating Humidity |
Up to 95% relative humidity |
|
Distance |
Up to 1500M (5000ft) depends on environment |
|
Dimension |
7.8cm (L) x 5.6cm (W) x
2.9cm (H) |
|
Material |
Die Casting Aluminum |
|
Safety Certification |
FCC/CE/VCCI |
Package Content:
1W Booster/Amplifier
AC adapter (110~240V input)
RG316 Cable (30cm)
5dBi Antenna
User Manual
Warranty:
1-Year Warranty
